The
5860 is designed to look and operate exactly the same
as the built-in annunciator. Features include an 80-character
backlit LCD providing easy-to-understand system messages.
The annunciator is ergonomically designed with over-sized
buttons for the most frequently used features, Reset
and Silence.
In
addition to status messages displayed on the LCD, five
LEDs for alarm, supervisory, trouble, silence, and AC
power indicate status. The annunciator is available
in gray to match virtually any decor and red for applications
where the annunciator must stand out. The annunciator
enclosure can be surface or flush-mounted. A trim ring
kit is available for surface mounting.
Operation
When the system is normal and receiving AC power, the
Power LED is lit and all other LEDs are off. Other LEDs
turn on as the conditions occur. Users identify themselves
to the control panel by entering a code on the annunciator
or by turning the firefighter’s key. When a user
presses a button, the annunciator piezo beeps and the
LCD prompts the user to enter a code or other relevant
information. Multiple users can work at different annunciators
simultaneously without affecting each other.
Features
- 80-character
display
- Tactile
/ audible feedback
- Accepts
user codes or firefighter’s key.
- RS-485
interface to panel
- Can
be flush- or surface-mounted. Trim ring available
for surface-mounting.
- Operation
and appearance identical to on-board annunciator
- Supports
simultaneous use by multiple users
- UL
Listed, complies with NFPA 72 5860 Remote Annunciator
Specifications
Operating
Voltage: 24 VDC
Standby
Current: 20 mA
Alarm
Current: 25 mA
Max.
per system 8
Ambient
Temperature: 32°F to 120°F (0°C
to 49°C)
Mounting:
Surface or flush
Wiring
distance from IntelliKnight panel Up to 6,000
feet (depending on wiring method)
Dimensions:
Height: 7-3/8”
Width:
9-1/8”
Depth:
1-1/2”
Colors:
Lt. gray (5860) Red (5860R)
|
