With
5.0 amps of output power, six programmable Flexput I/O
circuits, and two Form C relay circuits, the Model 5895XL
Intelligent Power Module allows you to greatly enhance
the capabilities of an IntelliKnight system, distributing
power where needed throughout a facility.
5895XL
modules connect via the RS 485 system bus. Up to eight
5895XL modules can be used per IntelliKnight system.
Each 5895XL has its own optically isolated RS 485 bus
to which other modules, such as 5860 remote annunciators
and 5824 printer interface modules, can be connected.
You can also connect 5815XL SLC expansion modules, adding
flexibility and wiring distance. Each 5895XL supports
its own backup batteries and monitors the AC power.
Operation
The green LED on the 5895XL board indicates communication
with the IntelliKnight FACP. The six Flexput I/O circuits
can be notification appliance circuits, continuous power,
resettable power, door holder power, or initiation circuits
that can support both 2- and 4-wire smoke detectors.
All Flexput I/O circuits and relay outputs are individually
mappable from the IntelliKnight 5820XL FACP.
Features
- 5.0A
output power
- 6
I/O circuits, 3A each, programmable as notification
circuits, auxiliary circuits, or initiation circuits.
- 2
Form C programmable relays rated at 2.5A at 24 VDC
- Ground
loop isolation
- Transient
protection
- SBUS
repeater conditions the RS 485 signal
- 6,000
feet wiring distance from the 5895XL (same distance
as main FACP)
- Large
cabinet can house two 17 amp hour batteries
- UL
864 Listed, complies with NFPA 72 and 101
Specifications
Primary
AC: 120 VRMS at 60 hz, 2.5A
Total
Accessory Load: 5A at 24 VDC
Current:
Standby: 40mA
Alarm: 160mA
I/O
Circuit Power: 3A per system (5A total per
system)
Dimensions:
16"W x 26"H x 4.65"D (40.6cm W x 67cm
H x 11.8cm D)
Mounting:
Surface or flush
Color:
Red
|
